About PowerStation Size
powerstationsize.com
PowerStation Size is a free calculator and a library of manufacturer specifications for portable power stations. The job of the site is to answer how much capacity you need, whether the inverter can hold the running watts, and whether a published peak will start a motor. It is not a ranked review list and it is not a store.
Why the site exists
Most sizing pages answer a different question. They tell you which product is best in a category. The question people actually type is closer to: will this run a fridge through an outage, or a CPAP through a night, and how many watt-hours should I shop for.
Those are two checks, not one. A station can hold enough energy and still refuse to start a compressor. A CPAP with a heated humidifier can draw roughly twice the power of the same machine running dry. Combining those into one default would give an answer that is wrong in the direction that matters.
What you can do here
- The calculatortakes the devices you run. Capacity, continuous watts, and startup surge are checked separately. Hours update as you type. You can copy a link that encodes the load in the URL.
- Worked scenarios(CPAP night, fridge outage, camping day, a power tool) show the estimated watt-hours and which published nameplates cover that load.
- Station pageslist capacity, continuous output, and peak, with the manufacturer URL and the date those figures were read. A peak that is only a resistive boost is labeled so it is not used as inverter surge.
- Guidesinclude decision pages forCPAP backupandcamping, plus watts versus watt-hours and surge versus boost.
How the numbers are made
Each station record is copied from the manufacturer product page named on that record: capacity, continuous output, and the peak figure, plus the date that page was read. If the only peak on the page is a resistive boost, the record is marked so the calculator will not use it to clear a motor start. Runtime hours are calculated from those figures and from the device library. They are not lab measurements. This site does not claim to have tested the machines overnight.
Device wattages are typical ranges. Where a manufacturer publishes a figure, that is noted on the device entry. Where it does not, the range is an engineering estimate used to seed the calculator. You can edit watts and hours on every row.
Default constants: inverter efficiency 0.85, reserve margin 1.20, usable capacity 0.85. The formulas, the solar check, and the known limitations are on themethodology page. A verification older than 90 days is flagged on the model page.
Who publishes this site
PowerStation Size is published by Chen Jie. It is a specification library and calculator, not a lab and not a medical publisher. Station numbers are transcribed from the manufacturer page named on each record. Runtime hours are calculated from those figures and from the device library. This site does not claim hands-on overnight testing.
Source for the calculator and the specification database is onGitHub. Corrections go tohello@powerstationsize.com. Send the model name and the manufacturer page that contradicts the record.
How it is funded
The site is supported by affiliate commissions. If you follow a link to a retailer and buy something, we may earn a commission at no extra cost to you. That never changes what the calculator recommends. See theaffiliate disclosure.
We do not accept payment for placement. We do not run price-tracking or price-drop alerts. Manufacturer list prices, where available, are dated reference figures, not live offers.
What this site is not
- It is not medical advice. A power station is not a medical device and is not a substitute for the battery your equipment maker specifies. Confirm a therapy backup plan with your provider and your clinician.
- It is not electrical advice. Never backfeed household wiring through a wall or dryer outlet. Whole-home backup needs a manufacturer-approved, code-compliant transfer or isolation system, installed by a qualified electrician where required.
- It is not a review site with hands-on testing. Every runtime figure is calculated from published specifications.
- It is not the manufacturer. Brand names and packshots identify products. They are not an endorsement by those companies.
Contact and corrections
Emailhello@powerstationsize.com. If a specification is wrong, send the model name and the manufacturer page that contradicts us. That is the most serious error this site can make. The record will be corrected and the verification date updated.
Privacy practices are on theprivacy policy. Rules for using the estimates are on theterms of use.