Can the Anker SOLIX F1500 run a refrigerator?
Anker SOLIX F1500 does not publish an inverter surge, so this fridge start is not cleared.
The fridge numbers are an estimated engineering range from the device library, not a measurement of your compressor. The station numbers are fromwww.ankersolix.com, verified 2026-10-05.
The check
- Binding limit
- Unverified boost
- Estimated cycling runtime
- Not applicable until it can start and run
Usable capacity 1,306 Wh at 85 percent of nameplate, divided by 52.5 W average draw.
What was compared
| Check | This fridge load | This station |
|---|---|---|
| Running watts | 150 W nameplate | 1,800 W continuous |
| Startup | 1,200 W estimated inrush | 2,400 W boost, not inverter surge |
| Energy | 420 Wh over 8 h at 35 percent duty | 1,536 Wh nameplate |
What that means
The 2,400 W figure is a resistive boost rating. This site does not treat that number as clearance to start a compressor. Continuous output (1,800 W) is enough for the 150 W running draw, and capacity is a separate question once a motor start is actually verified. Seesurge versus boost.
