Can the Jackery HomePower 1000 Plus v2 run a refrigerator?
Jackery HomePower 1000 Plus v2 does not publish an inverter surge, so this fridge start is not cleared.
The fridge numbers are an estimated engineering range from the device library, not a measurement of your compressor.
Source:www.jackery.com. Verified 2026-10-10. Numbers are copied from that page, not from a lab test.
The check
- Binding limit
- Unverified boost
- Estimated cycling runtime
- Not applicable until it can start and run
Usable capacity 870 Wh at 85 percent of nameplate, divided by 52.5 W average draw.
What was compared
| Check | This fridge load | This station |
|---|---|---|
| Running watts | 150 W nameplate | 1,800 W continuous |
| Startup | 1,200 W estimated inrush | 3,600 W boost, not inverter surge |
| Energy | 420 Wh over 8 h at 35 percent duty | 1,024 Wh nameplate |
What that means
Startup not checked. The 3,600 W peak is a boost rating ("1800 W Rated Output 3600 W Peak." Marketing copy also says "3600W surge" for tools; the spec block still labels Peak.), read 2026-10-10. Continuous output (1,800 W) is enough for the 150 W running draw, and capacity is a separate question once a motor start is actually verified. Seesurge versus boost.